The wheels must be mounted according to all the indications stated in the technical Cards. Before mounting the tyre on the wheel, you must follow the listed instructions very carefully: The wheels must be suitable for the vehicle (special fitment);

• No part of the vehicle (clamp, brakes, shocks-absorber etc…) must be in touch with the wheel (2mm tolerance recommended);
• All the accessories (bolts, nuts, reduction rings) must be adapted.
• No claim will be accepted if the wheels won’t be mounted following the instructions explained above.
• No claim will be accepted if goods wrongly supplied will be used.
• For mounting problems and/or discrepancies on the adaptability arising from any use or application not corresponding to the information provided by WSP Italy and/or not described in the attached manual, the validity of the guarantee and the right to reimbursement and acceptance of any complaints is declined with immediate effect.

It is recommend to keep clean the surface of the wheel and prevent it from coming into contact with substances that may alter it, particularly salty deposits. Do not use high-pressure jets to clean, nor acids neither abrasive/corrosive means that may damage or scratch the chromium plated surface such as powders or metallic blades. It is recommended to use only water and neutral soap with a soft cloth for delicate surfaces. It is recommended to avoid during car-washing the use of the same detergents used to wash the engine and the underbody.